Latest Automobile Engineering Seminar Topics

Latest Automobile Engineering Seminar Topics

Nanorobotics is the technology of creating machines or robots at or close to the microscopic scale of a nanometer (10-9 meters). More specifically, nanorobotics refers to the still largely hypothetical nanotechnology engineering discipline of designing and building nanorobots, devices ranging in size from 0.1-10 micrometers and constructed of nanoscale or molecular components. Download Seminar Report for Nanorobotics...
Now a days, India is the country which having worlds largest railway network.? Over hundreds of railways running on track everyday.? As railway has straightway running as well as it has somewhat risky and dangerous as per as general public and traffic concern.? As we know that it is surely impossible to stop the running train at instant is some critical situation or emergency arises.? Therefore at the places of traffic density, suburban areas and crossings there is severe need to install a railway gate in view of protection purpose Download Seminar Report for Automatic Railway Gate Switching...
A supercapacitor, an ultracapacitor or megacapacitor is a condenser Electrochemical that has an extraordinary capacity to store energy relative to its size when compared to common capacitors. These are of particular interest in automotive applications for supplementary storage for battery electric vehicles. Download Seminar Report for Ultracapacitor...
Electronic toll is an inter-operate-ability system allowing cashless payment at toll booths on national highways. It increases revenue, curbing leakages and ensuring smooth travel across the country. The problem without Electronic toll system is that most people have to wait in the queue of slow moving vehicles of the toll booth. Other problems include delay in reaching the destination, time wasting, and cash exchange. Download Seminar Report for Electronic Toll Collection System Using Rfid...
Nanofluids are engineered colloidal suspensions of nanoparticles in a base fluid. In general the size of these nanoparticles vary from 1-100nm. The type of nanoparticle used is directly dependent on the enhancement of a required property of the base fluid. All physical mechanisms have a critical length scale, below which the physical properties of materials are changed. Therefore particles <100 nm exhibit properties that are considerably different from those of conventional solids. The noble properties of nanophase materials come from the relatively high surface area to volume ratio that is due to the high proportion of constituent atoms residing at the grain boundaries. Download Seminar Report for Nano Fluids...
Sensor is a device that detects or senses the value or changes of value of the variable being measured. The term sensor some times is used instead of the term detector, primary element or transducer. The fusion of information from sensors with different physical characteristics, such as light, sound, etc enhances the understanding of our surroundings and provides the basis for planning, decision making, and control of autonomous and intelligent machines. Download Seminar Report for Multisensor Fusion and Integration...
Latest Automobile Engineering Seminar Topics
Brewing is the production of alcoholic beverages and alcohol fuel through fermentation. The term is used for the production of beer, although the word "brewing" is also used to describe the fermentation process used to create wine and mead. It can also refer to the process of producing sake and soy sauce. "Brewing" is also sometimes used to refer to any chemical mixing process. There are nine major steps in the brewing process, which include malting, milling, mashing, brewing, cooling, fermentation, racking and finishing. Download Seminar Report for Brewing...
Now a day the wireless technologies are more in use and are widely evolving. Some of the technologies now in use are Wi-Fi, Wi-max, Zigbee, and Bluetooth. Out of which Bluetooth is most popular. These technologies are widely used to connect the large devices like mobile phones or personal computers. No other existing wireless technologies will connect with small button cell battery devices so effectively. So the Nokia introduced the new radio technology called Wibree. Download Seminar Report for Wibree...
Although the first electric power system, Edison's Pearl Street system, was based on direct current (dc), the advantages of alternating current (ac) systems were obvious by the turn of the 20th century. The voltage drop in an electrical circuit limited the distance from the source of electricity to where it was consumed. Download Seminar Report for Electrical Power System...
The term ergonomics was coined from the Greek words ergon (meaning "work") and nomos (meaning "rules).So the literal meaning is "the rules of work," Ergonomics is the science of fitting the work-place conditions and job demands to the capabilities of the working population. The goal of ergonomics is to make the work place more comfortable and to improve both health and productivity. Download Seminar Report for Ergonomics...
In this chapter one, can find the general design of the value cargo carrier of the future. In order to determine this general design, mostly the method of Roskam is used (Roskam, 1997). This method is divided into two main design sequences of which the first design sequence is performed. The second design sequence consists of optimization and more detailed design which is out of the scope of this project. The first paragraph describes the internal lay out of the aircraft which differs from the internal lay-out designed in the mid-term phase. Download Seminar Report for Aircraft Design...
Laser ignition has become an active research topic in recent years because it has the potential to replace the conventional electric spark plugs in engines Compared to conventional spark ignition. Laser ignition allows more flexible choice of the ignition location inside the combustion chamber with the possibility to ignite even inside the fuel spray .Modern engines are required to operate under much higher compression ratios, faster compression rates, and much leaner fuel-to-air ratios than gas engines today. It is anticipated that the igniter in these engines will face with pressures as high as 50MPa and temperatures as high as 4000 K. Download Seminar Report for Laser Ignition System...
Ocean thermal energy conversion (OTEC) is a technology that converts solar radiation into electrical energy. The OTEC system also generates fresh water as a primary product and generates only enough electricity, as a secondary product, to operate the OTEC system itself. The oceans, being a vast renewable resource, it has the potential to produce billions of watts of electric power. According to some experts this potential is estimated to be about 10^10KW power generation. Download Seminar Report for Ocean Thermal Energy...
Upon learning theplan from the Ipoh city authorities to add a new fleet of 200 buses and to build the Ipoh Sentral Transportation Hub (ISTH) in Bandar Meru Raya which sits in the northern fringes of the city, TRANSIT wishes to kindly suggest the Perak Public Transport Committee and the Ipoh City Council members to consider the suggestions within this proposal before going ahead with the RM188 million project.TRANSIT believes that transformation of Ipoh?s mass transit requires the support systems to be put in place first,rather than embarking on piece-meal solutions that may end up with the results similar to the RapidKL and RapidPenang initiatives. Download Seminar Report for Mass Rapid Transit System...
Magnetic refrigeration is a cooling technology based on the magnetocaloric effect. This technique can be used to attain extremely low temperatures (well below 1 kelvin), as well as the ranges used in common refrigerators, depending on the design of the system. Download Seminar Report for Magnetic Refrigeration...
Thermal barrier coatings are highly advanced material systems usually applied to metallic surfaces, such as gas turbine or aero-engine parts, operating at elevated temperatures, as a form of Exhaust Heat Management. These coatings serve to insulate components from large and prolonged heat loads by utilizing thermally insulating materials which can sustain an appreciable temperature difference between the load bearing alloys and the coating surface. Download Seminar Report for Thermal Barrier Coating...

Tags : Collection of Automobile Engineering Seminar Topics || Automobile Engineering Seminar Topics || Latest Automobile Engineering Seminar Topics


2013 123seminarsonly.com All Rights Reserved.