| |
Error Code 24 in Device Manager After Plugging in USB Mouse |
 |
After you plug in a Universal Serial Bus (USB) mouse, a yellow exclamation point may appear next to your PS/2 mouse port in Device Manager. When this occurs, the PS/2 mouse port has a status of "Code 24."
|
 |
After Upgrade, Keyboard and Mouse Do Not Work When You Resume HP Brio BA400 from Hibernation |
 |
After you upgrade your Hewlett-Packard (HP) Brio BA400 Windows 98-based computer to Windows Millennium Edition (Me), the keyboard and mouse may not work when you resume from hibernate mode.
|
 |
Cannot Remove the Driver for the PS/2 Mouse in Device Manager |
 |
When you replace a PS/2 mouse with a Universal Serial Bus (USB) mouse, Device Manager installs the USB mouse, but it leaves the PS/2 driver installed. If you remove the PS/2 driver listing within Device Manager, and then restart your computer, the...
|
 |
Universal Serial Bus IntelliMouse "Back" Button Goes Back Two Pages |
 |
This issue can occur when you are using Microsoft Internet Explorer and Windows Millennium Edition (Me), and you are using a Universal Serial Bus (USB) mouse. When you press the left button on a Microsoft IntelliMouse Optical and Web once (or the...
|
 |
Windows Me-Based Computer Hangs When You Try to End a Task |
 |
When you try to end a task that is listed in the Close Program dialog box, you may receive an error message that indicates the program is not responding. If you then try to move this error message dialog box, your computer may stop responding (hang).
|
 |
Universal Serial Bus Devices Do Not Work in Safe Mode |
 |
After you attempt to start your computer in safe mode by holding down the CTRL key, or by using the System Configuration utility to enable the Startup menu, your computer may not respond to any keyboard commands, or you may receive the following error...
|
 |
Unable to Change Settings for IntelliPoint Mouse Devices (Explorer, Optical, and Web) in Windows Me |
 |
After you upgrade your computer to Microsoft Windows Millennium Edition (Me), you may be unable to change or reassign the mouse buttons for the Microsoft IntelliMouse Explorer, Optical, and Web Universal Serial Bus (USB) mouse devices in the Mouse...
|
 |
The PS/2 Mouse May Not Work After You Upgrade to Windows Millennium Edition |
 |
If you upgrade your computer to Windows Millennium Edition (Me), and then you attempt to use your PS/2 mouse, your mouse may not work correctly or it may be completely disabled.
|
 |
"Windows Cannot Load the File [vmouse.vxd]" Mouse Error Message Displayed by Device Manager |
 |
Your mouse may not work as expected. In Device Manager, there may be an exclamation point inside a yellow circle next to the mouse. If you view the properties of the mouse, you may see the following error message: This device is not working properly...
|
 |
Microsoft Plug and Play Pointing Device Not Detected |
 |
When you connect a Microsoft Plug and Play Serial Mouse, Microsoft EasyBall, or Microsoft IntelliMouse to your computer, the new device may not be detected by Windows. Running the Add New Hardware Wizard does not correct the problem. |
